Review of the last 4 years

I was on Google Photos the other day and it highlighted photos from the same dates in previous years and made me realise that I’d been working on the railway now for just over 4 years – the earliest photos I have being from the 2015 Christmas holiday period.  This made me realised just how far it’s come in that time, so I thought it would be a good time to look back, but also high-light some of the more recent work which was not made it to the blog.

2015

2015 saw trains being unpacked and the start of the frame to support the layout.  With very few changes, the frame has been in place ever since. 

2016

The work from over Christmas 2015 continued into the new year to add the surfaces to the layout.  This then allowed the track laying to start, and also the start of some of the scenic work with the engine shed under construction.

2017

Another year and more progress was made on the railway.  This included new additions to enable a future station, the first trains actually being run on the layout which eventually resulted in both loops being usable.  The year also included starting to investigate DCC control and starting to build a viaduct.

2018

This was a very quite year for the layout due to the majority of the year being focused on building a 1:1 scale extension to the house, so very little happened in the loft besides a small amount of cabling work.  This didn’t stop a few new additions to layout

2019

The start of the year continued the quiet spell for the railway as the number of follow up jobs for the extension occupied most of the first half of the year, however the second half of the year has been much more productive with significant progress being made.

This year has seen a number of new additions join the layout including the Dapol Class 68, a Bachmann Class 66, a Hornby Flying Scotsman and the Hattons Railhead Treatment Train.  Interesting to see how the purchases have been split across the different manufacturers rather than just being from a single one.

2019 has also seen significant progress on the wiring front.  Previously only the two main loops were functional, however now there is a control panel and the goods yard is functional allowing trains to traverse the different sidings and on and off the main line.  There’s a blog post here about how the power side of the layout works, and hopefully at some point in the future (no promises on when) there will be one on the point control.

Also moving forward has been the scenic work, mostly in sitting in front of the TV in an evening, however it does allow progress without being in the loft.  This year has seen a large section of retaining wall well on it’s way, the viaduct has gone from a wooden frame to starting to look like a proper railway structure and work as started on something which should become the large station.

2020

Writing the post has made me appreciate how far things have come over the last 4 years, from a concept to a layout which is starting to really take shape one.

Looking ahead to 2020 briefly, I’ll start by making no promises about what and when things will get done as the railway is always one of the lower priority activities, however there are a clear set of next things to do…..

  • Fit the remaining point motors to the points that are currently laid
  • Install the power supplies and relay boards to control the points at the far end of the layout
  • Commission the second half of the control panel
  • Finish the viaduct
  • Landscape around the viaduct area
  • Build the large station platforms
  • Start landscaping the large station and surrounding areas

My aim (as always) is to try and create more blog posts as I go along to show the progress, however please bear with me as time is limited and often blogging time can eat into actually working on the railway.  However this gives me something to look back on next year and see how I did!

 

 

New Additions – Flying Scotsman and Railhead Treatment Train

Following a recent significant life event that happens but once per year a couple more items of rolling stock have found their way to the model railway, so I thought I would add some photos of them to the blog.

Hatton’s Railhead Treatment Train

First up is the Hatton’s Railhead Treatment wagons.  These are the first “own brand” type models that I’ve bought where the lead on the design and manufacture is done by a retailer rather than a traditional model manufacturer.  However despite that they are incredible models in their own right.

I first spotted these when Hatton’s first announced that they were going to make them and was interested by them at that point, so very happy now to have a set to run on the layout.  In a slightly unusual choice for me I’ve gone with the weathered look rather than the clean version.  Having looked at both, I came to the conclusion that while passenger trains and steam locos are cleaned regularly, engineering trains are not, so actually the weathered version is far more accurate.

On un-boxing once again with a modern model I was surprised by the amount of detail in the models, to the point where I almost had trouble handling the units and getting them onto the layout as I was worried about breaking them.  The other thing that I noticed was the weight in the base units as they are made from metal, so weigh more than I’m used to for wagons.

Once on the layout I reached for a Lima EWS Class 47 that was readily to hand, and to my surprise I discovered the weight of the wagons was such that the Class 47 couldn’t actually pull them.  This is the first time I’ve ever seen a loco sit there and spin it’s wheels when attempting to pull a train.  So I moved up to the recent addition of the Class 68 which as well as being more representative of real life also managed to pull it fine.

Hornby R1072 Flying Scotsman

Since the layout is rooted in the North Yorkshire area somewhere near York, and has a mix of both local and east coast mainline trains appearing then a Flying Scotsman is a logic choice to make an appearance.

I’ve been keeping an eye out for one on and off over the last couple of years, but not really doing anything about it and there have been higher priorities for new rolling stock.  However more recently it’s crept up the list and I’ve been keeping an eye out for possible options.

In the end I’ve gone with an older set off Ebay was what in good condition.  This gives me a good quality loco which has a DCC socket in it so I can convert easily in the future, as well as three carriages and the usual bits of track and controller.  While I’m not really interested in the last couple of items, the rolling stock was what I’m after and they are good.

 

Photo Gallery – Fountains Abbey

This last week was half term, and in a change to the usual model railway posts I thought I’d share a few photos from our recent break. At the start of the week we went to Fountains Abbey in North Yorkshire.  This is an ruin of a huge abbey complex, and walking around it you get a real sense of awe.

Unfortunately we forgot to take either of the main cameras, so all the photos were taken on the phone, but they are still worth sharing.

Model railway control panel

I’m very aware the blog has been quite on progress around the actual layout for the last 18 months or so.  The reality is that most of last year and the early part of this year went into building an extension to the house, so the railway got fairly neglected, however since the summer work has slowly moved forward, so hopefully there will be a few more posts on the blog detailing the work.

One of the next areas which has needed attention has been taking the wiring from being just the two main loops to the stage where I can control some of the turn outs and be able to run trains into some of the goods yard sidings.

The concept

When I started building the layout my original thought was that I’d build it all using DCC control since that was the future.  That way I’d just run common bus round the board and eventually use the DCC to switch the points also.

The reality has been quite different – I’m still getting up to speed on DCC and how to use it, but more significantly most of my locos are analog control.  While the most recent ones have the ability to fit a DCC decoder, and in some cases I’ve bought them ready, a much higher proportion do not or will require significant work to fit.

So in the end I reached the conclusion that I needed to add a more classic style control panel to the layout to enable me to switch controllers to areas of tracks, and also switch the points.  The key difference here is that as well as being able to switch the analog controllers to the different regions of track I also want to be able to switch parts of all of the layout over to DCC control as and when I’m ready.

So the control panel has three sections – a 4 way Gaugemaster analog controller for basic running, and then on either side switching panels for each end of the layout.

4 channel Gaugemaster controller

This blog post is going to concentrate mainly on the physical construction of the control panel.  I’m going to leave the wiring to a future blog post.

Panel construction

How to build the actual control panels themselves was one of the big questions I had when I started this.  I did look around and a bit trying to pick up ideas – this post on RMWeb gave me a lot of inspiration, however in the end I’ve done what I think is my own idea.

The main design on the control panel was generated in Microsoft Visio.  The choice of this was mainly because I have access to it and know it well through work.  This allowed me to draw out the basic design, but also to create layers to represent the size and locations of elements such as the switches and structure to make sure they fitted correctly.

Once I’d got the design completed I was able to print it out, cut out and laminate it.  This then created a nice clean surface which will hopefully last a long time.  Once cut to size the laminated design was then stuck using PVA glue onto a piece of 3mm plywood of the correct size to give strength.  I was then able to drill through the laminated paper and plywood to fit the switches needed for the power and point control.  

One area I did struggle with was how to deal with the edges and make that look neat.  This was not just around the edge of the whole thing, but also between the three sections the overall control panel is made up from.  The process of laminating paper made this worse as to make the lamination work well then the paper needs to be cut smaller than the required size to ensure the lamination seals all the way around.

My plan (however I can’t get to this until all the wiring is complete and I’m ready to fasten the panel in place) is to use from right angle plastic that I had kicking around from another project.  This is about 12mm right angle, so will overlap the edge of the panel and hide the edge lamination as well as the different layers.  Where the different panels fit together I’ll do the same thing, but just with 12mm strips of flat plastic.

Mounting the panel

Once I’d worked out where I wanted them, the actual mounting of the panels was another challenge.  I didn’t want them to be flat – either horizontal or vertical – as that didn’t feel very natural to me.  Also I have the 4 channel analog controller to mount alongside them, so some careful construction would be needed.

The aim was to have three sections, all angled at 45 degrees from the layout to make operation easy.  The outer sections would be the switches, with the middle being the Guagemaster controller. So lots of pieces to fit together accurately but also ensure that things like the controller are well supported and won’t move when operated.

Again, my Visio license came useful here – it allowed me to take designed I’d sketched out and actually plot them accurately to scale.  I was then able to print out the 4 key sections that define the size and angle of the controls and use that as a template to cut them out.

From there it became simpler, adding legs, fitting to the layout and adding a bottom piece for the controller to rest on.  Some fine tuning around getting the precise positioning for the control panels and analog controller was required during construction, but basically the core design remained unchanged.

Next steps

The next stage is to actually wire the control panels into place.  This work has started for the first panel which controls the goods yard and since much of the required infrastructure (point motors, relay boards etc) was in place then this should be fairly easy.  The other end of the layout by the viaduct and stations will take considerably longer as in some places the track is not even laid yet, let alone having all the other bits needed!

As mentioned previously, my aim for a future blog post is to try and explain how the wiring of the layout will work, so I’m going to sign off here in order to have time to actually do the work!